User's Manual

-9-
To install the SD card, open its latch, place its indented side downward, insert the card into the card slot,
and then close the latch.
To remove the SD card, open its latch and slightly take the card out. And then close the latch.
Note:
1. The mobile phone cannot automatically identify the SD card being inserted when the mobile phone is
powered on. You must power off the mobile phone and then power it on, so that the phone can identify the SD
card.
2. The SD card is a miniature object. Keep it out of the reach of children for fear that children swallow
it!
1.7 Charging the Battery
Your mobile phone can monitor and display the battery state.
Normally the remaining energy of the battery is indicated by the battery level icon at the upper right
corner of the display screen.
When the battery energy is insufficient, the mobile phone prompts "Battery low".
Using a travel adapter:
Install the battery into the mobile phone before charging the battery.
Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the
adapter is fully inserted.
Insert the plug of the travel charger to an appropriate power outlet.
During the charging, the battery level grids in the battery icon keep flickering till the battery is fully
charged.