User's Manual

2524
when roaming outside of your home network.
Note: You can select a network other than your
home network only if it has a valid roaming agreement
with your home network.
Security Settings
Use this menu to protect the phone against
unauthorized use by managing the several access
codes of your phone and SIM card.
There are six types of security setting categories,
and you can optimize security mode by choosing sub
menus in “Security Settings” in “Settings” menu.
These security settings will help you to keep privacy
and to prevent other people from using the phone
without your permission.
SIM Security Setup
This function allows you to activate password to
protect your phone against unauthorized use.
Your phone provides the following selections for
your option:
• PIN Lock: This function allows you to lock the
phone with a specific SIM card. The feature is
designed to prevent the use of your SIM cards by
means of another person’s phone if your SIM cards
lost. You can switch on or off to activate the PIN Lock
function.
• Fixed Dial: This function dials only the
numbers in the fixed dialing number (FDN). To save
and edit numbers on the list, you need the PIN2 code.
• Barred Dial: Allows you to switch on or off
restricted call function. However, you need to check if
your SIM supports this function.
• Change Password: Allows you to change PIN
code.
Phone lock
You can switch on or off to activate the phone lock
function to protect your phone. If you switch Phone
Lock on, you need to enter the password to set the
request on. The default password is “0000”.
Auto Keypad Lock
This allows you to lock the phone’s keypad to
prevent accidental key pressed. In Auto Keypad
Lock submenu, select the time that after the last key
press will be disabled, and press OK.
Change Password
Allows you to change the phone lock password.
Restore factory settings
This feature would reset the phone to the same
settings as those configured at the factory. In this
case, it does not delete the downloaded objects and
phonebook records.
You will need to input password to restore factory
settings. The initial password is 1122.