Owner`s manual

Note: Some sauna models are shipped with a spare TEMPERATURE SENSOR in case the

TEMPERATURE SENSOR is damaged in transit. The manufacturer decides this according to sauna

models and packaging.

I. Installing the Radio (optional)

1. Remove the two screws from the top of the CD player and discard. Put in the CD/radio from

the outside. (see figure 18 and 19)

2. Attach the bracket using the screw provided. (see figure 20)

3. Plug in the CD/radio power. (see figure 21)

4. Attach the L/speaker and R/speaker connections.

5. Plug in the CD/radio antenna connector.

Figure 18 Figure 19

Figure 20 Figure 21

J. Assembling the RADIO BOX (optional)

1. Locate the wood sides for the CD/Radio housing. There is one for the front, side, and

bottom. (see figure 22)

2. Attach “A” on side panel with “A” on bottom panel and insert screws. (see figure 23)

3. Attach “B” on front with “B” on side panel and “C” on front panel with “C” on bottom panel and

insert screws. (see figure 24)

Meijer.com