Troubleshooting guide

B. Understanding The Difference Between The Top And Bottom Of The Wall Panels

The (2) side panels are in the upright position when the vertical slots (for the heat emitter panel

below the bench) align with the notches on the floor panel. The rear panel is in the upright

position when the horizontal bench guide is closer to the bottom of the rear panel than the top. As

for the front panel, the control panel is located at the top of the panel. On some models, some of

the panels are marked with directional stickers. (see figure 6)

Figure 6

C. Rear Panel

The rear panel has the heat emitter panels side-by-side. (see figure 7)

Figure 7