Troubleshooting guide

J. Assembling the RADIO BOX (optional)

1. Locate the wood sides for the CD/Radio housing. There is one for the front, side, and

bottom. (see figure 17)

2. Attach “A” on side panel with “A” on bottom panel and insert screws. (see figure 18)

3. Attach “B” on front with “B” on side panel and “C” on front panel with “C” on bottom panel and

insert screws. (see figure 19)

4. Screw the RADIO BOX to the REAR PANELS. The back opening (the larger opening) on the

RADIO BOX will face the RIGHT REAR PANEL. The front opening (the small opening and

where the CD/radio is inserted) on the RADIO BOX will face the FRONT PANEL.

Figure 17 Figure 18 Figure 19

K. Installing the CD/RADIO (optional)

1. Unscrew the lock screws on the top of CD player

2. Connect the plug from the CD/RADIO with the plug coming down from the roof. (see figure

20)

3. Connect the left and right speaker plugs. (see figure 21 and 22)

4. Connect the antenna plug to the CD/RADIO. (see figure 23)

5. Insert the CD/RADIO into the RADIO BOX. It is not necessary to mount the CD/RADIO once

you slide it into the RADIO BOX because the radio will just sit in place.

Figure 20 Figure 21