Troubleshooting guide

H. Installing the TEMPERATURE SENSOR

1. Enter the sauna and remove the protective covering from the TEMPERATURE SENSOR.

Situate the TEMPERATURE SENSOR so that it is vertical, pointing downward. (see figure 14)

Figure 14

Note: Some sauna models are shipped with a spare TEMPERATURE SENSOR in case the

TEMPERATURE SENSOR is damaged in transit. The manufacturer decides this according to sauna

models and packaging.

I. Putting on the ROOF COVER

1. Place the ROOF COVER over the top of the sauna. Take care in pulling the power cord

through the hole in the roof cover. Gently place the ROOF COVER onto the ROOF PANEL.

When the edges are aligned, screw the ROOF COVER to the roof panel. Mount the antenna.

(see figure 15 and 16)

Figure 15 Figure 16