Specifications

ManualsBrandsDynamic ManualsComputer equipmentDX-ARC-SWB

TechnicalSpecications

Material Grey aluminium

Protection rating IP54

Operating Temp -25 to 50°C

Storage Temp -25 to 70°C

Actuator Current Limit 3 – 12A (programmable)

Continuous lighting current 1A (each indicator)

2A (driving light)

Size 85 x 125 x 30 mm

Weight 410 grams

DX Connectors 2 DX BUS Sockets

Material Grey aluminium

Protection rating IP54

Operating Temp -25 to 50°C

Storage Temp -25 to 70°C

Continuous lighting current 1A (indicators)

2A (driving lights)

Size 125 x 85 x 29 mm

Weight 400 grams

DX Connectors 2 DX BUS Sockets

DX LIGHTING AND ACTUATOR MODULES

Single module providing both lighting and seat

actuator functions from a single module.

• Actuator control of up to ve separate seat actuators

• Independent current level trips for each actuator

• 3 channel lighting support for indicators, hazard

lights, driving lights

• No direct battery connections required, all power

sourced via the DX BUS

• External switch inputs can be programmed to slow

or stop chair driving if activated

Provides all of a wheelchair’s lighting requirements.

• 3 channel lighting support for indicators, hazard

lights, driving lights

• No direct battery connections, all power

sourced via the DX BUS

• Short and open circuit detection for lamps

DX-CLAMBCombinedLightingandActuatorModule

DX-LM-Z Lighting Module

DX-CLAMB

DX-LM-Z

Part numbers

DX-CLAMB Combined Lighting and Actuator Module

also required – DX BUS cable,

DXLOOM-AUX Connector Kit

Part numbers

DX-LM-Z Lighting Module

also required – DX BUS cable,

DXLOOM-AUX Connector Kit

rotoMrotoM

Battery

Master

Remote

DX-CLAMB

Lighting System

Up to 5 Actuators

Power

Module