Specifications

Servo steering module for use on wheelchairs that have
a separate motor for servo control of steering castors.
• Control of steering servo with potentiometer
steering feedback
• Provision of lighting outputs
• Range of programming options to give optimum
performance on any servo steered wheelchair
DX-SLM
DX POWER MODULES
• 60A or 80A dual channel or 160A single channel
• Dynamic Controls load compensation algorithm
• Fully programmable to suit all DC motor
power chairs
• Advanced safety and protection features
• Compact, rugged enclosure sealed against dust
and water
• 2 DX BUS connectors for easy system expansion
• Visible “ash code” diagnostics
DX-PMB/PMB2/PMB2-S
DX-PMB
DX-SLM Servo Lighting Module
Part numbers
DX-PMB DX Power Module (60A per channel)
DX-PMB2 DX Heavy Duty Power Module (80A per channel)
DX-PMB2-S DX Servo Power Module (160A Single Channel)
also required – DXLOOM-PM Connector Kit
Connector Kits
DXLOOM-PM DX Connector Kit
Part numbers
DX-SLM Servo Lighting Module
also required – DX BUS cable,
DXLOOM-SLM, DXLOOM-PM Connector Kit,
DX-PMB2 or DX-PMB2-S
Power
Module
rotoMrotoM
Battery
Master
Remote
DX-SLM
Lighting System
Optional
(1 or 2 channel)
Servo Steering Motor
The DX power modules provide excellent response and driving control in all terrain and are available to
suitallmid,rearandfrontwheeldrivecongurations.
TechnicalSpecications
Compatible motors 24 volt DC, Permanent magnet
Compatible park brakes 12 or 24 volt DC
Material Aluminium
Protection rating IP54
Operating Temp -25 to 50°C
Storage Temp -25 to 70°C
Size 185 x 125 x 45 mm
Weight 1.4 kilograms
DX Connectors 2 DX BUS Sockets
TechnicalSpecications
Compatible motor 24 Volt DC, Permanent magnet
Servo motor current 30A (peak),
5A (continuous)
Material Black powder coated aluminium
Protection rating IP54
Operating Temp -25 to 50°C
Storage Temp -25 to 70°C
Size 210 x 123 x 38 mm
Weight 530 grams
DX Connectors 2 DX BUS Sockets
25