Specifications

DX MASTER REMOTES
Part numbers
DX-REMG90 Master Remote
DX-REMG90A Master Remote with jack sockets
DX-REMG90T Master Remote with toggle switches
DX-REMG91/G91S
High-end display remote ideal for specialty
control inputs.
• 5 different easily selectable drive proles
• 7 segment LED display and battery gauge
• Support for proportional joysticks or switched
inputs with 3 or 4 quadrant control
• Access to actuator and environmental controls
• Latched actuator operation
• Three jack sockets or toggle switches for on/off
and mode control
• Single switch control through scanning mode (G91S)
DX-REMG91 Display/DX-REMG91S Scanner Display
Material Die-cast aluminium
Protection rating IPX4
Operating Temp -25°C to 50°C
Storage Temp -40°C to 65°C
Size 143 x 71 x 169 mm
Weight 620 grams
DX Connectors 2 DX BUS Connectors
Material Plastic
Protection rating IPX4
Operating Temp -25 to 50°C
Storage Temp -40 to 65°C
Size 125 x 85 x 32 mm
Weight 275 grams
DX Connectors 1 DX BUS Connector
TechnicalSpecications
High-end joystick remote easily operated by a wide
variety of users.
• 5 different drive proles
• 7 segment LED display and battery gauge
• Proportional, 4-quadrant or 3-quadrant control
• Access to actuator and environmental controls
• Supports latched actuator and simultaneous
actuator operation
• Optional jack sockets or toggle switches for on/off
and mode control
DX-REMG90
The master remote is the “brains” of the DX system and every DX power chair must have one. Every
masterremotehasanOn/Offswitch,aprogrammingsocketandaDXstatusindicator.Theymayalso
be used to control seat positioning, lighting, and environment controls.
TechnicalSpecications
Part numbers
DX-REMG91 Display Master Remote
DX-REMG91S Display Master Remote with scanner
DX-GNK-KIT2 Gooseneck Mounting Kit for DX-REMG91
and DX-REMG91S
DX-REMG90A
Power
Module
rotoMrotoM
Battery
Master
Remote
rotoMrotoM
Battery
REMG91
Power
Module
Secondary
Remote
rotoMrotoM
Battery
Power
Module
Scanning
Switch
Menu
Switch
(Optional)
REMG91S
17