SOLUTIONS PRODUCT CATALOGUE FOR POWERCHAIRS AND SCOOTERS
Image here
Contents Introduction ....................................................................... Product Family Selection Guide .............................. 03 ............................ 05 ................................ 13 DX2 Wheelchair Control Solution DX Wheelchair Control System Shark Wheelchair Control System ........................... A-Series Integral Wheelchair Controller 47 .......................................... 49 .............................................. 51 .......
INTRODUCTION Dynamic Controls is committed to enhancing people’s lives. Our philosophy is built on combining an intimate understanding of the needs of mobility product users with our R&D design skills. This has enabled us to be the world’s premier supplier of electronic control systems for power wheelchairs and scooters for over 30 years. Our products range from cost effective integral controllers to a world leading modular control system that can be customised to suit a wide range of user needs.
PRODUCT FAMILY SELECTION GUIDE Wheelchair Controllers High Performance system designed for higher power rehab chairs. Based on a modular design with the flexibility to integrate a wide range of input and control devices. DX2 / DX Reliable solution for most standard power chair applications. Suitable for mid range power requirements with options to support actuators, lighting and attendant control. SHARK Cost effective integrated controller suitable for any lower power drive application.
DYNAMIC CONTROLS DX/DX2 COMPONENTS Master Remotes DX2-REM550/551 Advanced Joystick Remotes DX-REMG90 Joystick Remote Secondary Remotes DX-REMG91/G91S Display Remotes DX-RJM Remote Joystick DX-REM34B Joystick Remote DX-RJM-HD Heavy Duty Joystick DX-ACU1 Attendant Dual Control Power Modules Actuator Modules DX2-PMA70/70L/90/90L DX2 Power Modules 70 or 90A (120A boost) With or without lighting DX2-ACT2/ACT4 DX2 Actuator Modules 2 or 4 channel DX-PMB / PMB2 Power Module 60 or 80A DX-PMB2-S Single ch
DX-REM41D Tray Remote DX-RJM-MINI Mini Joystick DX-REM32B Chin Control Remote DX-RJM-VIC-CCD Finger Joystick DX-REM35B Tray Remote DX-ACC4B Switch Input DX-ACU3B Attendant Master Remote DX-SNP Sip & Puff Input Environmental Control DX-ARC5 Actuator Remote Control DX-ECU Environmental Control Unit DX-IRIS2 IR Transmitter DX-ARC-SWB Actuator Remote Control DX-LM-Z Lighting Module DX-MTX IR Mouse Transmitter DX-PCMR IR Mouse Receiver 5
DX2 TM WHEELCHAIR CONTROL SOLUTION
THE DX2 SYSTEM DX2 is a modular power chair control solution that expands the proven DX system through the addition of powerful new components. These allow the design of a rehab power chair that will meet the requirements of any user ranging from drive only control to full environmental control. The DX2 system is designed to maximise comfort and user control, is easy to set up and maintain and is highly reliable.
DX/DX2 SYSTEM CONFIGURATIONS A key feature of the DX2 system is backwards compatibility with the DX system. This means that DX2 and DX modules may be used within the same system. Master Remote Power Module Any DX/DX2 Module or or or DX DX2 DX DX2 DX DX2 The modules required for some typical applications are listed below.
DX/DX2 MASTER REMOTE SELECTION GUIDE Check the following table for a quick reference to the options on each Master Remote. Power Module Motor Motor Battery 10 Maximum no.
DX2 MASTER REMOTES DX2-REM550/551 Advanced Joystick Remote The DX2 Master Remotes are stylish high-end joystick remotes with a large, clear, full colour LCD screen. They provide easy control and a high level of functionality to a wide variety of users.
DX2 POWER MODULES DX2-PMA70/70L/90/90L The DX2 power modules are the workhorses of the DX2 system and provide fast, precise control of high power drive motors. They are a robust solution for mid, rear and front wheel drive configurations.
DX2 ACTUATOR MODULES DX2-ACT2/4 The DX2 actuator modules are simple to set up yet are highly configurable. Proportional joystick controlled actuators give smooth, fine control of seating for improved comfort. The use of multiple actuator modules allows control of up to 12 actuators with minimal wiring.
DX2 CONNECTORS DX2 Power Module Connector Kits DX2 Connectors are available in kit form or individual parts.
DX WHEELCHAIR CONTROL SOLUTION
THE DX SYSTEM The DX system is a proven and reliable power chair control system that meets a wide range of user’s needs and applications.
DX MASTER REMOTES The master remote is the “brains” of the DX system and every DX power chair must have one. Every master remote has an On/Off switch, a programming socket and a DX status indicator. They may also be used to control seat positioning, lighting, and environment controls. DX-REMG90 High-end joystick remote easily operated by a wide variety of users.
DX-REM34B Master Remote A simple joystick remote that can be easily operated by a wide variety of users.
DX-REM32B Chin Remote Easy to use joystick controlled master remote that can be operated by a user’s chin.
DX-ACU3B Master Attendant Remote A joystick remote that can be operated by an attendant or carer.
DX SECONDARY REMOTES In addition to a Master Remote any DX system can also have a Secondary Remote installed. This enables the user to have a wider choice of input or specialised rehab controls. Power Module Motor Motor Battery Master Remote Secondary Remote DX-ACU1 Attendant Dual Control Joystick remote that enables an attendant to drive the chair instead of the user. The attendant dual control unit may be used in addition to a secondary remote and master remote all on the same system.
DX-RJM-HD Heavy Duty Joystick Heavy duty switched joystick remote for users who might damage a standard joystick through rough handling.
DX-RJM-VIC-CCD Finger Steering Control Non contact proportional finger control for use by users with limited finger strength. • Designed for finger control with zero force required • Full proportional control with no physical contact • Any angle mounting Please note additional protection is required if driving outdoors in wet conditions.
DX-SNP Sip and Puff Interface Sip and Puff control that can be fine tuned to suit any user or application.
DX POWER MODULES The DX power modules provide excellent response and driving control in all terrain and are available to suit all mid, rear and front wheel drive configurations.
DX LIGHTING AND ACTUATOR MODULES DX-CLAMB Combined Lighting and Actuator Module Single module providing both lighting and seat actuator functions from a single module.
DX-ARC5 Actuator Remote Control Separate hand-held remote control for actuators. • • • • Power Module DX-ARC5 Simple operation Controls up to 5 actuators Can be used with DX or DX2 actuator modules Programmable options to allow seat position to be adjusted while driving Part numbers Motor Motor Master Remote Battery DX-ARC5 Actuator Remote Control Module Please note an actuator module is also required.
DX ENVIRONMENTAL CONTROLS DX-ECU Environmental Control Unit Environmental control of up to 8 switched outputs using the same user input device as used for driving.
DX-PCMR Infra-red Mouse Receiver Infra-red mouse receiver that allows powerchair users to drive a computer mouse directly from their joystick with full proportional control.
DX-ACC3 Charger Socket Module Provides separate battery charging socket for 24 Volt Battery Chargers up to a maximum of 8A. Part numbers DX-ACC3 DX-ACC3 Power Module Motor Motor Battery Charger Socket Technical Specifications 30 Material Plastic Size 64 x 44 x 49 mm Weight 160 grams DX Connector 1 DX BUS Plug on a 1.
DX SWITCHES SWTA5018 Wafer Switch A five switch unit built into a low-profile housing. • Slightly recessed switches that are 60 mm in diameter • Marked with direction control • 9 pin D-Type connector Part numbers SWTA5018 Wafer Switch SWTA5018 Technical Specifications Size 400 x 150 x 13 mm Force 100 grams SWTA5024 Penta Switch Miniature five way switch.
SWTA5020 Mini Joystick with Push Five switch joystick activation(4 directions, push down for the 5th switch). • Can be easily mounted for hand or chin operation • 9 pin D-type connector Part numbers SWTA5020 Mini Joystick with Push SWTA5020 Technical Specifications Size 120 x 30 mm Force 120 grams (200 grams for Push) SWTA5026 Star Switch A five way multiple switch that comes with five coloured dots.
Buddy Button Robust but sensitive single switch that is available in a wide range of colours. Terminated with a 3.5mm jack plug. Part numbers SWTA5710 Buddy Button - Red SWTA5720 Buddy Button - Green SWTA5730 Buddy Button - Purple SWTA5740 Buddy Button - Pink SWTA5750 Buddy Button - Yellow SWTA5760 Buddy Button - Blue For DX-REMG91S monitored against disconnection SWTA9993 Buddy Button - Purple (monitored, use with DX-REMG91S) Technical Specifications Size 20 x 65 mm dia.
Mini Cup Switch Very small switch for people with good targeting ability. Part numbers SWTA5808 Mini Cup Switch SWTA5808 Technical Specifications Size 25mm diameter, 9mm high Force 130grams GSM9976 5 to 1 Switch Adaptor This adaptor allows four or five single switches to be used in place of a multiple switch.
DX CABLES AND CONNECTORS DX BUS Cables DX and DX2 modules connect using small, flexible, 4 wire DX BUS cables. • Available in various lengths and types to support a variety of mounting options Part numbers Straight Cables GSM63003 DX BUS cable 0.3m GSM63005 DX BUS cable 0.5m GSM63010 DX BUS cable 1.0m GSM63015 DX BUS cable 1.5m GSM63020 DX BUS cable 2.0m GSM63025 DX BUS cable 2.5m Curly Cables GSM63051 GSM63051 GSM63052 DX BUS curly cable 0.8m (compressed) DX BUS curly cable 1.
GME64909 DX BUS Connector Cover The DX BUS connector protects unused DX BUS sockets against contamination or accidental short circuit. Part numbers GME64909 DX BUS Connector Cover GME64909 Technical Specifications Size 16.5 x 12.5 x 10.3 mm Colour Black DX Connector Kits DX connectors are available in kit form or as preassembled looms.
DX Pre-assembled Leads Separate connector covers are also available for these looms. • Some are compatible with DX2 Power Modules as noted below Part numbers GSM61190 DX Battery Loom – 450mm GSM61191 DX/DX2 Left Motor Loom – 700mm GSM61192 DX/DX2 Right Motor Loom – 700mm GCN0788 DX Battery Connector Cover GCN0787 DX/DX2 Motor Connector Cover # per Power Module 1 1 1 1 2 GSM61192 DX Lighting and Seating Module Connectors Available as kits or individual parts.
Connector Tools (continued) Positronic Insertion and Extraction Tool • For assembly and removal of the Positronic pins CRIMP9996 AMP Innergy Tool and Die • For crimping DX / DX2 motor pins and DX battery connection pins • Supplied as a separate hand tool and crimp die Part numbers CRIMP9995 CRIMP9994 38 CRIMP9999 Positronic Crimp Tool CRIMP9998 Positronic Crimp Turret CRIMP9997 Positronic Insertion Tool CRIMP9996 Positronic Extraction Tool CRIMP9995 AMP Innergy Crimp Tool CRIMP9994 AMP Inner
DX TEST EQUIPMENT DX-BCT DX BUS Cable Tester Simple pass or fail tester for all DX BUS cables. • Test for short circuits or open circuits Part numbers DX-BCT DX BUS Cable Tester DX-BCT Technical Specifications Size 80 x 150 x 55 mm DX Connectors Weight 225 grams 2 AA batteries are included. 2 DX BUS Sockets DX-CMT DX CLAM Tester Tests all functions of the Combined Lighting and Actuator Module (DX-CLAMB).
40
SHARK WHEELCHAIR CONTROL SOLUTION
THE SHARK SYSTEM The SHARK System is a versatile and cost-effective Powerchair control solution designed to fit the majority of standard power chair applications.
SHARK REMOTE MODULES DK-REMD01/11/21/31 The DK-REMD is a stylish modern joystick remote that is simple to use and configure.
SHARK POWER MODULES DK-PMB40/50/60 Basic drive only power module.
SHARK CABLES Shark BUS Cable One cable is required to connect remote module to power module. Available in a variety of lengths. Part numbers GSM80241 2.5m/8’2” GSM80242 2.0m/6’6” GSM80233 1.5m/4’11” GSM80234 1.0m/3’3” GSM80236 0.5m/1’7.7” GSM80234 Shark BUS Extension Cable May be used to extend standard bus cable if required.
SHARK CONNECTORS Battery & Motor Kits Battery and Motor connectors are sold as kits. Each kit includes housings, connector boots and all required pins.
A-SERIES INTEGRAL WHEELCHAIR CONTROLLER
A-SERIES INTEGRAL WHEELCHAIR CONTROLLER The A-series is a high quality yet cost effective 50A integrated controller for power wheelchairs. It offers class leading drive performance and is ideal for lightweight or folding chairs and drive only applications.
R-SERIES SCOOTER CONTROLLER
R-SERIES SCOOTER CONTROLLERS The R-Series is a high quality, value for money scooter controller that will provide a refined drive experience, available in 50A and 90A versions.
RHINO SCOOTER CONTROLLER
RHINO SCOOTER CONTROLLERS The Rhino controller is a robust, high quality scooter controller that may also be used for other applications requiring precise motor control in forward and reverse directions. Rhino controllers are available in 70A, 110A and 160A variants to meet the requirements of all types of scooter.
PROGRAMMING
PROGRAMMING Dynamic Controls provides two programming tools for configuring products: • Hand Held Programmers (HHP) - a convenient hand held device. • Wizard – PC Programming tool HAND HELD PROGRAMMERS The Hand Held Programmers (HHP) allow wheelchair and scooter manufacturers, dealers and health professionals to adjust the system settings to suit a particular wheelchair, scooter or individual.
WIZARD PC PROGRAMMING TOOL Wizard is a software programming tool designed to program, configure and diagnose all products from Dynamic Controls. It is intended for manufacturers, dealers and therapists.
Programming Adaptors and Wizard Kit replacement parts In the event of loss or accidental damage replacements can be ordered individually.
MOTORS
MOTORS Dynamic Controls wheelchair motors are specifically designed for wheelchairs and are optimized for high performance and long range. They are ideal for indoor/outdoor chairs and are compatible with any Dynamic control system.
ACCESSORIES 59
ACCESSORIES Charger Plug 3 pin plug for connecting battery chargers to all Dynamic Controls wheelchair and scooter controls. Part numbers GCN0309 Charger Plug Connections: Pin 1 Pin 2 Pin 3 B+, Battery Positive B-, Battery Negative Linked to Pin 2, inside plug Linking pins 2 and 3 inside the charger plug will stop the wheelchair or scooter from being driven away with the battery charger plugged in.
Magnetic Key For use with Master Remotes that have the magnetic keylock feature. Part numbers DC-MKEY Magnetic Key DC-MKEY Wheels and Tyres These aluminium wheels are supplied complete with pneumatic tyres and tubes. Part numbers WHL90002 12.5”/31.75cm diameter WHL90022 12.5”/31.
INDEX 62 Part numbers Pages Part numbers Pages Part numbers Pages CRIMP9994 CRIMP9995 CRIMP9996 CRIMP9997 CRIMP9998 CRIMP9999 DA50-A41 DA50-B41 DA50-C41 DA50-C51 DC-MKEY DK-ACU DK-ADAPT DK-PMB60 DK-PMB01 DK-PMB11 DK-PMB21 DK-PMB31 DK-REMD01 DK-REMD11 DK-REMD21 DK-REMD31 DK-PMC01 DK-PMC21 DR-CONSETA DR50-A01 DR90-A01 DR-PRGLM02 DS112K01 DS112KB02 DS162KD01 DS2K-PD DS2K-PI DS72K01 DS112K01 DS72KA04 DS72KB02 DS112KB02 DS116KD01 DSLOOM-112K DSLOOM-72K DSLOOM-162K DWD-DLR-U DWD-EDL-U DWD-FAC-U DWD-OEM-U
NOTES 63
EUROPE ASIA AUSTRALASIA USA Ph: +44-1562-826-600 Ph: +886-955-335-243 Ph: +64-3-962-2519 Ph: +1-440-979-0657 Fax: +44-1562-824-694 Fax: +886 225-981-562 Fax: +64-3-962-2966 Fax: +1-440-979-1028 eusales@dynamiccontrols.com asiasales@dynamiccontrols.com (CORPORATE OFFICE) sales@dynamiccontrols.com usasales@dynamiccontrols.com Dynamic Controls is the world’s leading manufacturer of electronic controls for power wheelchairs and scooters.
