Owner's Manual

10
Assembly Instructions
A. Choose a good location to assemble the sauna
1. The location must be dry, leveled, and away from any source of water
2. MAIN POWER cord must be easily accessible
3. Two adults are required for installation
4. Wood cabin installation order: Floor Panel Left Side Rear Panel Right Side Rear Panel
Left Side Panel Right Side Panel Front Panel Back Protection Grid Bench
Emitter Panel Bench Roof Panel Roof Cover
5. Tools Required: Philips Screwdriver and Ladder
B. Installing the FLOOR PANEL
1. Place the FLOOR PANEL on the floor. Some models have wood braces that must be
installed on the underside of the FLOOR PANEL. Please check to see if such wood braces
were packed in the box containing the FLOOR PANEL. If so, mount according to the
designated labels located on the underside of the FLOOR PANEL. Once installed, turn the
FLOOR PANEL right side up. Make sure the front side of the FLOOR PANEL is facing the
correct direction. (see Figure 10)
Figure 10
C. Installing the REAR PANELS
1. Remove the protection paper from the buckles. Attach the LEFT SIDE REAR PANEL to the
RIGHT SIDE REAR PANEL while the panels are sitting on the FLOOR PANEL. (see Figure
11)