Owner's Manual

14
H. Installing the TEMPERATURE SENSOR and Optional MAGAZINE RACK/TOWEL
RACK/SHELF
1. Enter the sauna and remove the protective covering from the TEMPERATURE SENSOR.
Situate the TEMPERATURE SENSOR so that it is vertical and pointing downward. (see Figure
18)
Figure 18
Note: Some sauna models are shipped with a spare TEMPERATURE
SENSOR in case the TEMPERATURE SENSOR is damaged in transit.
The manufacturer decides this according to sauna models and
packaging.
2. If your sauna comes with the optional Magazine Rack, Shelf, and/or optional Towel Rack, use
the screws provided to mount the Magazine Rack in the lower left hand side of the interior
FRONT WALL PANEL (in front of the glass window panel) and the Towel Rack to the interior
RIGHT SIDE WALL PANEL. Furthermore, use the screws to mount the shelf on either side
panels of the front panel where there are no heater panels. (see Figure 19, 20, 21 and 22)
Figure 19 Figure 20
Figure 21 Figure 22