Owner's Manual

11
C. Installing the FRONT WALL PANEL, RIGHT SIDE WALL PANEL and LEFT SIDE WALL
PANEL
1. Place the FRONT WALL PANEL up onto the FLOOR PANEL. Align the Metal
Guide Insert Brackets on the FRONT WALL PANEL and the LEFT SIDE WALL PANEL.
The LEFT SIDE WALL PANEL will need to be lifted in order to lock the Metal Guide Insert
Brackets onto the FRONT WALL PANEL. Secure into place by pulling downward on the
LEFT SIDE WALL PANEL. Make sure the Metal Guide Insert Brackets are locked into
place and the top of the FRONT WALL PANEL is flush with the LEFT SIDE WALL PANEL.
Do the same for the RIGHT SIDE WALL PANEL. (see Figure 10)
Figure 10
D. Installing the REAR PANEL
1. Remove the protection paper/tape from the buckles on the REAR WALL PANEL. Place
the REAR WALL PANEL up onto the FLOOR PANEL. Next, attach the REAR WALL
PANEL to the LEFT SIDE WALL PANEL and use the buckles to latch together. Do the
same for the RIGHT SIDE WALL PANEL. (see Figure 11)
Figure 11