Specifications

DPA 6.4
PAGE 9
PARALLEL MONO / BRIDGING SET-UP
PARALLEL MONO SET-UP:
Figure 8 XLR-cable for parallel mono connection of the power amplifier.
Loudspeaker Input signal Loudspeaker
Bass section Treble section
Figure 7 Parallel mono connection using an XLR-cable.
The loudspeakers must be equipped with separate connectors for the bass and treble sections.
Remember to remove the strap between the bass and treble sections on the loudspeakers. This
method is normally called BI-AMPING. Main advantages are the use of shorter loudspeaker cables
and a separation of the bass and treble currents in the power amplifier.
1
1
2 2
3
3
XLR- Female XLR-Male