User's Manual

Page | 8
2.1 PAIRING
The TW-3.0 is capable of receiving readings from up to 12 load cells simultaneously. In
order to establish communication with a new load cell the two devices must be
‘paired’. The TW-3.0 Handheld has 12 channels each of which can pair to an individual
device.
1. Press the MENU button on the TW-3.0
2. Select the CHANNELS menu
3. Select the CHANNEL with which the new device is to be paired to
4. Scroll down to the PAIR menu option
5. On the device to be paired with the TW-3.0 locate the PAIRING button
6. Ensure the device is powered off
7. Press and hold the PAIRING button for 8 seconds until the LED flashes twice per
second
8. Press the PAIR function on the TW-3.0 Handheld
9. A 30-second countdown timer will be initiated to search for the new device
10. Once the device has been paired the TW-3.0 will exit the pairing screen and the
LED on the new device will blink at once per second briefly
This completes the pairing process; the new device will now be present on the paired
channel.