User's Manual

Page | 32
6.3 0-5VDC ANALOGUE OUTPUT
The analogue output function is accessed from the Analogue Output option in the
Main Menu screen. The analogue output function provides a 0-5VDC analogue output
from an additional circular connector fitted to the TW-3.0 (not the USB) and works with
a single channel at a time.
Setup Parameters
Output
The output parameter options are enabled or disabled. The parameter is changed by
pressing the OK button on the handheld.
Channel
The channel parameter cycles through the enabled radio channels by pressing the OK
button on the handheld.
0V
This parameter shows the value in the unit to which the 0VDC output signal relates.
5V
This parameter shows the value in the unit to which the 5VDC output signal relates.