User's Manual

Page | 28
Baud Rate
The Baud Rate parameter can be set to either 9600, 19200, 38400 or 115200 and must
be the same as the receiving device.
Header
The Header parameter is a user configurable, alphanumeric field which will be printed
at the start of the serial string before any values. This can be used by third party
software to identify the start of a string or to match a required header by the software.
The example string below has a header included of $ABC
Channel ID
The options for the Channel ID parameter are enabled or disabled. When the parameter
is set to disabled no channel ID will be printed in the string. When the channel ID is set
to enabled it will print the channel ID in the string. The channel IDs are fixed to a
capital letter for each channel:
Channel 1
A
Channel 7
G
Maths 1
P
Channel 2
B
Channel 8
H
Maths 2
Q
Channel 3
C
Channel 9
J
Maths 3
R
Channel 4
D
Channel 10
K
Maths 4
S
Channel 5
E
Channel 11
L
Channel 6
F
Channel 12
M