User's Manual

Page | 26
Units
The two possible options for the Units parameter are enabled and disabled. When the
parameter is set to enabled, the log file will contain the unit of the value being logged
as a separate data item, when the parameter is set to disabled the unit will not be
logged. For example, below shows the contents of the log file with the unit of tonnes
enabled and disabled.
Enabled
03/10/2018 12:48,1.12,tonne,Valid
Disabled
03/10/2018 12:48,1.12,Valid
Terminator
The terminator parameter is used for when the data needs to be viewed in another
software suite other than Microsoft Excel the terminator will affect how the data is
displayed.
None
03/10/2018 12:48,1.12,Valid,03/10/2018 12:48,1.12,Valid,03/10/2018 12:48,1.12,Valid
LF Only
03/10/2018 12:48,1.12,Valid 03/10/2018 12:48,1.12,Valid 03/10/2018 12:48,1.12,Valid
CR Only
03/10/2018 12:48,1.12,Valid
03/10/2018 12:48,1.12,Valid
03/10/2018 12:48,1.12,Valid
CR and LF
03/10/2018 12:48,1.12,Valid
03/10/2018 12:48,1.12,Valid
03/10/2018 12:48,1.12,Valid