User's Manual

Page | 25
Setup Parameters
Mode
The two possible modes are enabled and disabled. When the mode is set to enabled,
the USB logging will start running based upon the setup parameters. If the USB
logging is set to enabled and then instantly defaults back to disabled then there is
either a missing or faulty USB stick.
Channels to Log
The possible options for Channels to Log are 1-16 channels, by clicking on the
parameter the user can configure which channels are going to be saved. NOTE: at least
1 channel must be enabled to allow the logging to commence.
Delimiter
The possible options for the delimiter are comma, tab and space. The user can select
how each data field is separated in the log file. An example of each type is shown
below:
Comma
03/10/2018 12:48,1.12,tonne,Valid
Tab
03/10/2018 12:48 1.12 tonne Valid
Space
03/10/2018 12:48 1.12 tonne Valid
NOTE: To be able to view the log files in separate columns in Microsoft Excel it is best
to select Comma.