User's Manual

Page | 15
Name
The name parameter allows the user to set a 16 character alphanumeric name to the
channel for easy identification. The name will then be displayed at the top of the screen
on the main display. As shown below with the name “LOADCELL 1”.
Pair
The pair function is used to permanently create a wireless connection between the TW-
3.0 Handheld and a remote device. The remote device must be set to pairing mode,
see section 2.1.
Rate
This is the sample rate between the TW-3.0 Handheld and the remote device. The
fastest is 4Hz (4 times per second) and the slowest is 0.1Hz (once every 10 seconds).
The slower the sample rate the slower the display will update but the longer the
battery will last.
Rolling Average
The rolling average function is used to average out display readings when they are
subject to large and fast variations, such as a lifted load being moved by wind. There
are three options:
Fast – averages the last 16 readings
Medium – averages the last 8 readings
Slow – averages the last 4 readings