User's Manual

Page | 12
In the event of a fault or warning condition, the screen will display one of the following
icons.
ICON
DESCRIPTION
There is no signal to the paired device
The paired device is exceeding it’s WLL
There is a fault with the paired device
The mV output from the strain bridge is outside of the allowable limit
A Slave TW-3.0 cannot communicate with the Master
The formula used in the Maths channel is invalid
During battery charging, the following icons will be displayed
ICON
DESCRIPTION
The TW-3.0 is charging
The TW-3.0 is fully charged
The paired device is charging
The paired device is fully charged