User's Manual

Page | 11
3.0 DISPLAY
The display screen will show the status of all features of the TW-3.0. During normal
operation, various icons will be present, see the table below for a description of each.
ICON
DESCRIPTION
Channel ID currently being displayed
TW-3.0 Handheld battery status
Signal Strength to paired device and QoS between 0 and 100
Battery status of the paired device
TW-3.0 is currently set as a Master – a numerical network ID will be shown
below
TW-3.0 is currently set as a Slave – a numerical network ID will be shown
below
The Peak Hold function is ON
The function keys on the TW-3.0 are locked
The Tare function is active
There is an active overload alarm
The USB data logging is running (advanced function)
The RS232 serial output is running (advanced function)
The analogue output is running (advanced function)