User Manual

FCC ID 2ASHV-TW30L module manual
Introduction
This document detail integration requirements for the Dynamic Load Monitoring TW3.0-L module,
FCC ID: 2ASHV-TW30L. The module is for integration into final product by Dynamic Load Monitoring (UK)
Ltd and the module is not available for sale to end users.
The module has not been assessed for simultaneous operation with another transmitter
Permitted antennas
The TW3.0-L module is fitted with a U.FL module and may only be used with the following antenna:
Molex 47950-2011 with integrated 200mm co-
axial cable and U.FL connector
WiFi (Dual Band) Antenna
Adhesive Mount, (2.4 → 5 GHz)
Antenna gain: 2.3 dBi
Power supply requirements
The module is to be powered from an external DC voltage in the range 3.2 to 4.2 V – typically from a
3.7V (nominal) Lithium Ion Battery. The power source must be capable of providing at least 200 mA.
Integration with other products
The module contains integrated measurement circuity for connection to a 4-port strain gauge
FCC compliance
FCC ID:2ASHV-TW30L
End product labelling
The final product shall be labelled “contains FCC ID:2ASHV-TW30L”
Human exposure to electromagnetic field
The module complies with FCC RF exposure limits for general population / uncontrolled exposure at
all separation distances