Integration Manual

3.0 OPERATION
An example of how the TL-3.0 can be housed is shown below with a description of
operation.
Power On:
To power the TL-3.0 on for use follow the steps below:
1. Press and hold the PAIR button until the LED becomes solid
2. The LED will flash once every 3 seconds if the TL-3.0 is connected to a receiving
device such as the TW-3.0 Handheld Display.
3. The LED will flash once per second if the TL-3.0 is not connected to a receiving device
Power Off:
To power the TL-3.0 off for use follow the steps below:
1. Press and hold the PAIR button, the LED becomes solid and then after 2 seconds turn
off