Integration Manual

2.3 SWITCH CONNECTION
The operation is designed for a push button momentary switch.
2.4 ANTENNA CONNECTION
The antenna connection is a U.Fl receptacle and is designed for use with the Molex
47950-0011 antenna and no other antenna may be used
2.5 BATTERY CONNECTION
The battery is connected to the TL-3.0 via the 2pin JST connector on a 2.54mm pitch.
The part numbers for connectors are:
Part
Part Number
Manufacturer
Connector
XHPX-2J
JST
Inserts
XHPX-2
JST
2.6 BATTERY CHARGER CONNECTION
The battery charger connection requires a 3.7 - 5VDC connection. There is internal
current regulation and protection on the PCB. The charger connection should not be
used to apply permanent power.