Integration Manual

Low Power Mode:
When the TL-3.0 is powered but not connected to a receiving device, it will
enter a low power mode which will look for signal once every 30 seconds. This
is to conserve battery life when the receiving device is powered off, but it is
not possible to reach the TL-3.0 to power it off.
3.1 PAIRING
The TL-3.0 needs to be paired with a receiving device, in order to establish
communication with a new device such as the TW-3.0 Handheld follow the steps
below:
1. Press the MENU button on the TW-3.0
2. Select the CHANNELS menu
3. Select the CHANNEL with which the new device is to be paired to
4. Scroll down to the PAIR menu option
5. On the device to be paired with the TW-3.0 locate the PAIRING button
6. Ensure the device is powered off
7. Press and hold the PAIR button for 8secs until the LED flashes twice per second
8. Press the PAIR function on the TW-3.0 Handheld
9. A 30 second count down timer will be initiated to search for the new device
10. Once the device has been paired the TW-3.0 will exit the pairing screen and the
LED on the new device will blink at once per second briefly
This completes the pairing process; the new device will now be present on the paired
channel.