Owner Manual

I. Installing the TEMPERATURE SENSOR and Optional SHELF

1. Enter the sauna and remove the protective covering from the TEMPERATURE SENSOR.

Situate the TEMPERATURE SENSOR so that it is vertical and pointing downward. (see

Figure 19)

Figure 19

2. If your sauna comes with the optional MP3 shelf, use the two screws provided to mount the

self on either the side panels or front panel. This shelf is not offered on all models (see figure

20)

Figure 20

3. If your sauna comes with the optional Magazine Rack and/or optional Towel Rack, use the

screws provided to mount the Magazine Rack in the lower left hand side of the interior FRONT

WALL PANEL (in front of the glass window panel) and the Towel Rack to the interior

RIGHT SIDE WALL PANEL. These accessories are not offered on all models. (see Figure 21

and Figure 22)

Figure 21 Figure 22

Note: Some sauna models are shipped with a spare TEMPERATURE SENSOR in case the

TEMPERATURE SENSOR is damaged during transit. The manufacturer decides this

according to sauna models and packaging.