Owner Manual

Assembly Instructions

A. Choose a good location to assemble the sauna

1. The location must be dry, leveled, and away from any source of water

2. MAIN POWER cord must be easily accessible

3. Two adults are required for installation

4. Wood cabin installation order: Floor Panel  Front Wall Panel with Glass Door  Left Side

Wall Panel  Right Side Wall Panel  Rear Panel  Roof  Bench Heat Emitter Panel 

Bench  Roof Cover (Order Could Vary)

5. Tools Required: Philips Screwdriver and Ladder

B. Installing the FLOOR PANEL

1. Place the FLOOR PANEL on the floor. (Note: The floor heater cord is located on the left side

and to the rear of the sauna room.) (see Figure 8)