Specifications

SOFTWARE INSTALLATION
3-2 PP 41x/03x
3.2 Bootloading from CD-ROM
Operating systems that install on the target hardware will generally install from CD-ROM, or may
require both a CD-ROM and floppy disk. Boot-loading from floppy disk requires no special steps
other than to connect the drive using an appropriate cable. To boot-load from CD-ROM, use the
following procedure:
a) While the BIOS is running its memory test, press the <ESC> key.
b) Wait for the pop-up boot device menu to be displayed.
c) Select the CD-ROM drive using the cursor keys, then press the <Enter> key.