Specifications

HARDWARE INSTALLATION
2-18 PP 41x/03x
2.11.2 External Reset
When the PP 41x/03x board is used with an AD PP5/001-4xU, AD PP5/002-xx or AD PP5/003-xx
Rear Transition Module, a local (board-level) reset may be generated from a connector on the RTM
(see that board’s Technical Reference Manual for details). The action of that connector input is
controlled on the PP 41x/03x by the External Reset switch shown in Figure 2-16. This switch has
no function when the PP 41x/03x is used without an RTM.
Figure 2-16 External Reset Switch
NOTE: Unlike the CompactPCI Push Button Reset, this facility is available when the
board is installed in any slot.