Specifications

HARDWARE INSTALLATION
PP 41x/03x 2-11
2.8 Adding or Replacing DRAM Modules
The PP 41x/03x accepts standard 200-pin DDR2-400 Registered ECC SODIMM modules
populated with 1.8V PC3200 DDR2 SDRAM. Two sockets are provided and will accommodate
modules up to 2 Gbytes capacity each. Identical SODIMMs must be fitted in both sockets. Consult
your distributor or Concurrent Technologies directly for details of suitable SODIMMs.
CAUTION: The PP 41x/03x does not support 64-bit non-ECC DDR2 SODIMM modules.
Do not fit such modules otherwise damage to the board and/or modules could result.
Figure 2-10 shows the way in which SODIMMs are fitted or removed. No other changes are
necessary when a SODIMM is added or removed.
Figure 2-10 DRAM Module Replacement