User Guide

Hardware and Software Design • Manufacturing Services

P a g e 38

Order Information

PMC BiSerial-II PS2 PMC Module with 4 TX serial channels, 4 Rx serial

channels, 8 bit parallel port with COS interrupt capability.

RS-485 IO. 32 bit data interface

Eng Kit–PMC BiSerial-II HDEterm68 - 68 position screw terminal adapter

http://www.dyneng.com/HDEterm68.html

HDEcabl68 - 68 IO twisted pair cable

http://www.dyneng.com/HDEcabl68.html

Technical Documentation,

1. PMC BiSerial-II Schematic

2. PMC BiSerial-II PS2 Reference test software

Data sheet reprints are available from the manufacturer’s

web site

reference software: C souirce code requires WinRT.

Note: The Engineering Kit is strongly recommended for first time

PMC BiSerial-II

purchases.

Schematics

Schematics are provided as part of the engineering kit for customer

reference

only

. This information was current at the time the printed circuit board was last

revised. This revision letter is shown on the front of this manual as

“Corresponding Hardware Revision.” This information is not necessarily current or

complete manufacturing data, nor is it part of the product specification.