User`s manual

CONTROLS & FUNCTIONS
The monitor will enter Auto Setup automatically the first time the unit is first turned on or another format is applied. If
for some reason the Auto Setup does not adjust the monitor to your satisfaction, use the OSD (On Screen Display) to
adjust the image to your preferences.
The OSD is composed of 5 membrane switches (as shown below) and a Bi-color LED. All the adjustments required
for the monitor are done through these buttons that interface with the Menu selections on the OSD.
Menu OSD Control Buttons:
• MENU: Selects command function
• (-) Decreases value. When OSD not on the screen, push “-” for volume adjust.
• (+): Increase value. When OSD not on the screen, push “+” to enable/disable volume
MUTE function.
• AUTO: Automatically adjusts for an optimal image.
• LED: Power ON: Green Light
Power Saving or No Signal: Orange Light
• POWER: Power on/off control
Menu Operating Instructions:
Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these
adjustments are made using the OSD control buttons on the front or rear of the monitor. While you use these buttons
to adjust the controls, the OSD shows you their numeric values as they change.
Direct Access Features:
1. Push “Auto” to set display to the optimal image.
Selecting and executing this control makes automatic adjustments to the horizontal and vertical size, horizontal
and vertical positions, frequency, quality and phase for a quick and easy setup of the display. There will be a
few seconds of delay while the Auto Setup function is in process.
2. With the OSD off, push the “MENU” button to display the main OSD menu.
3. Use “+/-“ buttons to select the function, and press the “MENU” button once to activate the selected function.
4. When submenus are included use the “+/-“ buttons to select the function, and press the “MENU” button once to
activate the selected function.
5. After selecting a function, use the “+/-“ buttons to make necessary adjustments. The setting bar moves and the
numeric value indicator changes to reflect your adjustments.
6. Select the “RETURN” icon to go back to the main menu or to select another function
7. Select “EXIT” to exit from the OSD. The new Settings will be automatically saved when exiting the OSD.
8. When OSD is not on the screen:
• Push “-“ to enable volume adjust function.
• Push “+” to enable/disable volume MUTE function.
Dynamic Displays, Inc Doc # 0015039
1625 Westgate Road Manual, QES1500 Progressive Series Rev: E
Eau Claire WI, 54703 Page 9 of 24