User`s manual

Signal Input Connections
Following are the pin out descriptions for the standard and optional connectors provided on the monitor:
VGA High Density HD15 Connector Pin Out
Pin Assignments for VGA Video HD15 Input Connector
PIN CONNECTION PIN
CONNECTION
1
Red Video (75 Ohm, 0.7 Vpp)
9 Key (No pin)
2
Green Video (75 Ohm, 0.7 Vpp)
10 Sync Ground
3
Blue Video (75 Ohm, 0.7 Vpp)
11 Monitor ID Bit 0
4
Monitor ID Bit 2
12 Monitor ID Bit 1 – Bidirectional
Data
5
Ground
13 Horizontal Sync (or Composite
Sync)
6
Red Video Ground
14 Vertical Sync
7
Green Video Ground
15 Monitor ID Bit 3 - DDC Clock
8
Blue Video Ground
Female BNC’s to HD15 Adaptor Cable (Optional)
BNC to HD15 Adaptor Connections
Video Signal
Input Available
Signal Description Red Green Blue Horz.
Sync or
C-Sync
(Gray
Cable)
Vertical
Sync
(Black
Wire)
Sync on Green
(SOG)
Composite Sync: Horizontal and
Vertical Sync signals are on the
Green Video Signal.
Connect Connect Connect
Composite Sync
(C-Sync).
Separate Composite Sync: Horizontal
and Vertical Sync signals are on the
Horizontal Sync Cable only.
Connect Connect Connect Connect
Separate
Horizontal and
Vertical Sync
Separate Sync: Both signals
(Horizontal & Vertical) are on
individual cables as identified on the
chart.
Connect Connect Connect Connect Connect
Dynamic Displays, Inc Doc # 0015039
1625 Westgate Road Manual, QES1500 Progressive Series Rev: E
Eau Claire WI, 54703 Page 6 of 24