User`s manual

Direct Access Features
Button Functions
MENU
1. Opens On Screen Display mode.
2. Selects the highlighted function.
(-)
1. Decreases the values of the selected function.
2. Moves the selector light-bar down.
3. When OSD not onscreen, push “-“ for volume adjust.
+
1. Increases the values of the selected function.
4. Moves the selector light-bar up.
2. When OSD not onscreen, push “+/MUTE“ to enable/disable volume
mute.
AUTO SETUP
1. Automatically adjusts the display for optimal image quality
POWER
1. Turns the monitor ON/OFF.
2. Indicated power status of the monitor:
• Green: Normal Operation.
• Orange: Power Saving mode or no signal input.
• Black (No light): Power OFF.
Definitions of OSD Adjustments
FUNCTION DESCRIPTION
AUTO-SETUP
Automatically adjusts for optimum image.
BRIGHTNESS
Adjusts the brightness of the image.
CONTRAST
Adjusts the contrast of the image.
DISPLAY ADJUST
H. Pos
Adjust horizontal screen positioning
V. Pos
Adjust vertical screen positioning
Clock
Fine adjustment on horizontal position of video signals
Phase
Phase adjustment, The phase should be adjusted until the screen
image is sharp.
Vertical Size
Use the “UP” / “DOWN” buttons to increase or decrease the Vertical
Size
Horizontal Size
Use the “UP” / “DOWN” buttons to increase or decrease the
Horizontal Size
Return
Exit to previous menu
Dynamic Displays, Inc Doc # 0015039
1625 Westgate Road Manual, QES1500 Progressive Series Rev: E
Eau Claire WI, 54703 Page 10 of 24