User`s manual

Signal Input Connections
Following are the pin out descriptions for the standard and optional connectors provided on the monitor:
VGA High Density HD15 Connector Pin Out
Pin Assignments for VGA Video HD15 Input Connector
PIN
CONNECTION
PIN
CONNECTION
1
Red Video (75 Ohm, 0.7 Vpp)
9
Key (No pin)
2
Green Video (75 Ohm, 0.7 Vpp)
10
Sync Ground
3
Blue Video (75 Ohm, 0.7 Vpp)
11
Monitor ID Bit 0
4
Monitor ID Bit 2
12
Monitor ID Bit 1 – Bidirectional Data
5
Ground
13
Horizontal Sync (or Composite
Sync)
6
Red Video Ground
14
Vertical Sync
7
Green Video Ground
15
Monitor ID Bit 3 - DDC Clock
8
Blue Video Ground
Female BNC’s to HD15 Adaptor Cable (Optional)
BNC to HD15 Adaptor Connections
Video Signal
Input Available
Signal Description
Red
Green
Blue
Horz.
Sync or
C-Sync
(Gray
Cable)
Vertical
Sync
(Black
Wire)
Sync on Green
(SOG)
Composite Sync: Horizontal
and Vertical Sync signals
are on the Green Video
Signal.
Connect
Connect
Connect
Composite
Sync
(C-Sync).
Separate Composite Sync:
Horizontal and Vertical Sync
signals are on the Horizontal
Sync Cable only.
Connect
Connect
Connect
Connect
Separate
Horizontal and
Vertical Sync
Separate Sync: Both signals
(Horizontal & Vertical) are
on individual cables as
identified on the chart.
Connect
Connect
Connect
Connect
Connect
____________________________________________________________________________________
Dynamic Displays, Inc Doc # 0048059
1625 Westgate Road QES1500 Progressive/Interlace Unit Rev: B
Eau Claire WI, 54703 Glee 17C2 Page 7 of 29