User`s manual

MONITOR SETUP
Unlike CRT displays, the LCD panel has a fixed pixel format over a set area. So for best performance,
the “native resolution” setting is always recommended. Use the following notes as a reference to setup
your display.
• 8.4”, 10.4” and 12.1” monitors: The native resolution of the LCD panel is 800 X 600;
Recommended resolution is 800 X 600 @ 60 KHZ
• 14.1” and 15” monitors: The native resolution of the LCD panel is 1024 X 768; Recommended
resolution is 1024 X 768.@ 60 KHZ
• 17”, 18.1” and 19” monitors: The native resolution of the LCD panel is 1280 X 1024;
Recommended resolution is 1280 X 1024 @ 60 KHZ or 1024 X 768 @ 60 Hz.
• 24” Monitors: The native resolution of the LCD panel is 1920 x 1200; Recommended resolution
is 1920 x 1200 @ 60 or 75 Hz.
Display Features
• Analog RGB Sync On Green (SOG) Capable
• DVI-D Digital Input Signal Capable
• RS-170A and RS-343 Video Signal Capable (Interlace Formats)
• VESA 75/100 Standard Mounting – Specific Models.
• DDC2B Plug & Play
• Universal Power Supply with VESA Power Management
• User Friendly OSD interface
• High Brightness and Contrast
• Wide Viewing Angle
• Front Remote Controls on Specific Models
• Tilt and Swivel Base on Specific Models
• Heavy Duty Cold Roll Steel Chassis on Specific Models
Display Options
• TTL Input for EGA, CGA and MDA Timings Option
• RCA (NTSC/PAL) and 4 Pin Mini Din (S-video) Optional
• 3/4/5 Wire BNC Inputs Option
• Universal Video Input Box Option
• Wireless Remote Control Option
• Anti-Reflective Protective Faceplate Option
• Strengthen Anti-Reflective Protective Faceplate Optional
• Sunlight Readable Option
• Touch Screen Option: Resistive, Capacitive and SAW (Surface Acoustic Wave)
• Differential Video Input Options for long cable lengths and/or high-noise factory environments
____________________________________________________________________________________
Dynamic Displays, Inc Doc # 0048059
1625 Westgate Road QES1500 Progressive/Interlace Unit Rev: B
Eau Claire WI, 54703 Glee 17C2 Page 4 of 29