User`s manual

Uneven Color / Color Too Dark / Dark Area Distorted /
White Color Is Not White
Use OSD Color Temperature Menu to adjust color setting.
No Sound
Check the audio signal cable connection between the
computer and LCD monitor.
Try pressing the “+MUTE” button to disable the volume
Mute function.
* Some models do not have speakers (sound)
The Display Is Dark / Bright Or Saturated
Verify video input levels are appropriate; 0.7V
PP
for Analog
inputs or 5 V
PP
for TTL input video signal.
The Display Blinks
Check the signal connection between the computer and
LCD monitor.
Image Blinks On And Off
The timing is special and not programmed in the MCU.
Contact the Sales department at Dynamic Displays, Inc.
800-793-6862.
Hook On Top Of The Image
The LCD monitor needs the Universal Video Input Box.
Contact the Sales Department at Dynamic Displays, Inc.
Dim Image
1. Adjust the brightness and contrast by OSD.
2. The timing is special and not programmed in the
MCU. Contact the Sales Department at Dynamic
Displays.
3. Flat Panel may have come unplugged from
inverter.
4. Lamp in Flat Panel may have failed.
* Contact Dynamic Displays, Inc. and return unit for repair
if suggestion 1 or 2 does NOT
fix the Dim Image.
Lines Missing Or Not Displaying On Top Or Bottom Of The
Image
The timing is special and not programmed In the MCU.
Contact the Sales department at Dynamic Displays, Inc.
800-793-6862.
Characters Missing On Left Or Right Of Image
The timing is special and not programmed In the MCU.
Contact the Sales department at Dynamic Displays, Inc.
800-793-6862.
Dynamic Displays, Inc Doc # 0048058
1625 Westgate Road Manual, QES1500 Progressive/Interlace Series Rev: D
Eau Claire WI, 54703 Page 22 of 33