User`s manual

Test Your Saved Settings:
Power the unit OFF and back ON using the POWER BUTTON on the keypad. The image should stay as you
set it.
Restoring Video Input Select To Factory Setting:
Return Flat Panel To PC Operation Once It Has Been Changed To DVI
1. Power up the Flat Panel Monitor without Video Input.
2. DVI will be displayed in the upper right hand corner of image.
3. Select the “UP” button until TV is displayed in the upper right hand corner of image.
4. Push the “MENU” button.
5. Push “UP” button, selecting OSD mode.
OSD
MODE
6. Push “MENU” button to (Enter).
7. Push “UP” button, selecting MEMORY RECALL.
MEMORY
RECALL
8. Push the “MENU” button.
THIS WILL RETURN YOU TO PC OPERATION.
Plug in Video input to Flat Panel Monitor.
Dynamic Displays, Inc Doc # 0048058
1625 Westgate Road Manual, QES1500 Progressive/Interlace Series Rev: D
Eau Claire WI, 54703 Page 19 of 33