User`s manual

Clock adjustment (Changes the fine adjustment on the horizontal position of the video signals):
Press the “MENU” button then the “DOWN” button to select “CLOCK”.
Use the “UP” / “DOWN” buttons to increase or decrease clock adjustment.
Select the “AUTO” button to exit clock position adjustment.
Clock
Incremental Bar
Phase adjustment (Should be adjusted until the screen image is sharp):
Press the “MENU” button then the “DOWN” button to select “PHASE”.
Use the “UP” / “DOWN” buttons to increase or decrease phase adjustment.
Select the “AUTO” button to exit phase adjustment.
Phase
Incremental Bar
Auto-Setup (Automatically adjust for optimum image):
Press the “MENU” button then the “DOWN” button to select “AUTO”.
Auto
(During Alignment)
Text Displayed On Image
Dynamic Displays, Inc Doc # 0048058
1625 Westgate Road Manual, QES1500 Progressive/Interlace Series Rev: D
Eau Claire WI, 54703 Page 14 of 33