User`s manual

CONTROLS & FUNCTIONS
Definitions of Video inputs:
FUNCTION DESCRIPTION
VGA / DVI
Selects analog or digital input
(Only works on DVI model option)
Analog Input
Select VGA input connector, HD15
Digital Input
Select Digital Input Connector, DVI
The monitor will NOT enter Auto Setup automatically the first time the unit is first turned on.
The OSD interface is composed of 5 membrane switches (as shown below) and a Bi-color LED. All the adjustments
required for the monitor are done through these buttons which interface with the Menu selections on the OSD.
Menu OSD Control Buttons:
• MENU: Selects command function.
• “DOWN” button: Decreases value.
• “UP” button: Increase value.
• AUTO Automatically adjusts for an optimal image.
Exits the function on OSD setup.
• LED: Power ON: Green Light
Power Saving or No Signal: Orange Light.
• POWER Power on/off control.
Menu Operating Instructions:
Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these
adjustments are made using the OSD control buttons on the front or rear of the monitor. While you use these buttons
to adjust the controls, the OSD shows you their numeric values as they change.
Direct Access Features:
1. Push “Auto” to set display to the optimal image.
Selecting and executing this control makes automatic adjustments to: Horizontal and Vertical Size, Horizontal
and Vertical positions, Frequency, Quality and Phase. This is a quick and easy setup of the display. There will
be a few seconds of delay while the Auto Setup function is in process.
Dynamic Displays, Inc Doc # 0048058
1625 Westgate Road Manual, QES1500 Progressive/Interlace Series Rev: D
Eau Claire WI, 54703 Page 10 of 33