User`s manual

ADSL Router User Manual
58
Note: When you initially add an PVC for the PPP connection and connect to ISP, a default
routing of 0.0.0.0 is added automatically to the IP Static Routing. If you set up more than
one PVC profiles and the first PVC is deleted, then you have to manually add the default
routing.
I
I
P
P
R
R
o
o
u
u
t
t
e
e
Static Route
This page shows all static route status and allows you to add new static IP route or delete IP route. A Static IP
Routing is a manually defined path, which determines the data transmitting route. If your local network is composed
of multiple subnets, you may want to specify a routing path to the routing table.
You can click
Create a new route
to add new route.
Destination Address
: The destination IP address of the network where data packets are to be sent.
Netmask
: The subnet mask of the destination IP address.
Forward packets to
: If you want add a rout on LAN side, you should choose the
Gateway Address
. Enter the
router address and then click
Apply
. If you want add a rout on WAN side, you should choose
the
Interface
. Select ATM PVC interface and then click
Apply
.
Dynamic Routing
Routing Information Protocol (RIP) is utilized as a means of exchanging routing information between routers. It
helps the routers to determine optimal routes. This page allows you to enable/disable this function.