User`s manual

ADSL Router User Manual
16
Bridge Mode
BRAS Broadband Remote Access Server
PPPoE
Client S/W
RADIUS
Server
PPP over Ethernet
Bridge
Mode
PC(s)
BRAS
STM-1
DSLAM
ADSL
Router
Loop
ISP
A
AA
Default Private IP
192.168.1.1
Public IP assigned
by BRAS
Hub
Description:
In this example, the ADSL Router acts as a bridge which bridging PC IP address from LAN to WAN. PC IP address
can be a static public address that is pre-assigned by ISP or a dynamic public address that is assigned by ISP DHCP
server, or can be got from PPPoE software.
Therefore, it does not require a public IP address. It only has a default private IP address (192.168.1.1) for
management purpose.
Configuration:
1. Choose a client PC and set the IP as 192.168.1.x (x is between 2 and 254) and the gateway as 192.168.1.1.
2. Start up your browser and type
192.168.1.1
as the address to enter the web-based manager.
3. Go to
Configuration >WAN Configuration > Create a New PVC
and select the Data Mode –
RFC1483
Bridged
. Then click
Next
button.
4. Enter the VPI/VCI values provided by your ISP and select the encapsulation type as
LLC/SNAP
or
VC MUX
.
Then click
Apply
.
5. Save the configuration from
System
>
Save Configuration
and
System
>
Restart
to restart your router for
initiating these settings.