Setup guide

Default Configuration for New Zealand
This Router is shipped with the following factory default settings.
Router IP address 192.168.1.1
Subnet mask 255.255.255.0
VPI 0 (do not change)
VCI 100 (do not change)
Encapsulation PPPoA VC-MUX (do not change)
NAT enabled (do not change)
DSL line mode auto
WAN IP dynamic
DHCP enabled
UPnP IGD disabled
Security:
Firewall off
Intrusion Detection disabled
Router configuration & management:
Administrative User name admin
Administrative Password admin
Telnet password admin
Users must not change the VPI, VCI, Encapsulation or NAT settings. DSL line
mode can be set to either auto or G.dmt. Advanced users who have other setup
preferences should refer to the User’s Manual.
Before you start
Make sure your computer has the following installed:
An Ethernet or USB port (see ‘Choose your connection option’ below)
TCP/IP protocol
A web browser, Internet Explorer 5.0/Netscape 6 or better
Obtain the following information from your ISP:
Login user name and password
Public IP address (Note: only required if you purchase a static IP)
DNS server IP address (if specified by ISP)
Choose your connection option:
Ethernet (for a standalone computer)
Connect using the enclosed "straight through" Ethernet cable.
1
2
ADSL Router Quick Set-up Guide