Setup guide

Indicator lights
There are five indicators on the Router’s front panel. Every time the Router is
powered on or reset, all the lights will come on indicating the self-test is in
progress.
9
Indicator Function Description
PWR Power Off - No power.
On - Power is on.
DIAG Diagnosis Off - Self-test OK.
Blinking – System updating.
On - Self-test or system failure.
LAN1 - LAN4 Ethernet Link Off - Ethernet link not present.
Blinking – Data going through Ethernet port.
On - Ethernet link is ok.
USB USB Link Off - USB link not present.
Blinking - Data going through USB port.
On - USB link is ok.
DSL Link Status Off - Handshaking/training in progress.
Blinking - Data going through ADSL port.
On - ADSL link is up.
ADSL Router Quick Set-up Guide