User`s manual

Chapter 4: Web Configuration
Local Network – UPnP
This allows you to enable the UPnP function
through the web page for your router.
Internet-Connections Setting
To set WAN settings for each service, please open Advanced– Internet Setting. This page allows
you to add new WAN settings, to edit or remove created WAN settings.
If you click the Connect line under the PVC
Name item, the system will connect to WAN
automatically. If the WAN connection is OK,
you can check the detailed information
directly.
Editing the Settings
To edit the WAN connection, please click the Edit button. The following screen appears.
VPI (Virtual Path Identifier):
Identifies the virtual path between endpoints
in an ATM network. The valid range is from
0 to 255.
VCI (Virtual Channel Identifier):
Identifies the virtual channel endpoints in an
ATM network. The valid range is from 32 to
65535 (1 to 31 is reserved for well-known
protocols).
Service Category:
There are five categories provided here for
your selection. Please choose any one of it as
you desired.
If you choose Non Realtime VBR, you have
to type in the following data.
The range for Peak Cell Rate is from 1 to
1690.
The range for Sustainable Cell Rate is from
1 to 1689 and must be smaller than Peak Cell
Rate.
The range for Maximum Burst Size is from 1
to 100.
37