ADSL2+ Modem Router User Manual
Table Of Contents
- Version 2.3
- For Installation
- For Using
- For Service
- Caution
- ARP (Address Resolution Protocol )
- DHCP (Dynamic Host Configuration Protocol)
- LAN (Local Area Network) & WAN (Wide Area Network)
- NAT (Network Address Translation) IP Address
- Private IP Address
- Public IP Address
- PVC (Permanent Virtual Circuit)
- UDP (User Datagram Protocol)
- Virtual Server
- VPI (Virtual Path Identifier) & VCI (Virtual Channel Identifier)
ADSL Router User Manual
2. Type cmd in the text box that
appears and click OK. Then you
will see the command prompt
window.
Another way to open the
command prompt:
From Start menu, point to
Programs, select Accessories,
and then click Command Prompt.
3. Type ipconfig at the command
prompt window and press Enter to
view the computer’s IP information
from DHCP server.
4. If the computer is holding a
current IP address, type ipconfig
/release to let go of the address,
then type ipconfig /renew to
obtain a new one.
Released IP Address
48