ADSL2+ Modem Router User Manual
Table Of Contents
- Version 2.3
- For Installation
- For Using
- For Service
- Caution
- ARP (Address Resolution Protocol )
- DHCP (Dynamic Host Configuration Protocol)
- LAN (Local Area Network) & WAN (Wide Area Network)
- NAT (Network Address Translation) IP Address
- Private IP Address
- Public IP Address
- PVC (Permanent Virtual Circuit)
- UDP (User Datagram Protocol)
- Virtual Server
- VPI (Virtual Path Identifier) & VCI (Virtual Channel Identifier)
Chapter 2: System Requirement and Installation
2. Right-click the Local Area
Connection icon and then click
Properties.
3. On the General tab, check out
the list of installed network
components.
Option 1: If there is no TCP/IP
Protocol, click Install.
Option 2: If you have TCP/IP
Protocol, skip to Step 6.
4. Highlight Protocol and then click
Add.
39