ADSL2+ Modem Router User Manual
Table Of Contents
- Version 2.3
- For Installation
- For Using
- For Service
- Caution
- ARP (Address Resolution Protocol )
- DHCP (Dynamic Host Configuration Protocol)
- LAN (Local Area Network) & WAN (Wide Area Network)
- NAT (Network Address Translation) IP Address
- Private IP Address
- Public IP Address
- PVC (Permanent Virtual Circuit)
- UDP (User Datagram Protocol)
- Virtual Server
- VPI (Virtual Path Identifier) & VCI (Virtual Channel Identifier)
ADSL Router User Manual
Setting up TCP/IP
In order to access the Internet through the ADSL Router, each host on
your network must install/setup TCP/IP first. Please follow the steps
below to set your network adapter.
If the TCP/IP protocol has not been installed yet, please follow the steps below for
installation. In the following illustrations, we will set the PC to get an IP address
automatically at the same time.
For Windows 98
1. Open the Start menu,
point to Settings and
click on Control Panel.
2. Double-click the Network icon.
30