ADSL2+ Modem Router User Manual
Table Of Contents
- Version 2.3
- For Installation
- For Using
- For Service
- Caution
- ARP (Address Resolution Protocol )
- DHCP (Dynamic Host Configuration Protocol)
- LAN (Local Area Network) & WAN (Wide Area Network)
- NAT (Network Address Translation) IP Address
- Private IP Address
- Public IP Address
- PVC (Permanent Virtual Circuit)
- UDP (User Datagram Protocol)
- Virtual Server
- VPI (Virtual Path Identifier) & VCI (Virtual Channel Identifier)
ADSL Router User Manual
If the USB driver has not been installed yet, you can also connect the router to the
PC with a USB cable and wait for Universal Plug and Play device to detect the router,
and then install the driver.
n Plug the USB cable into the USB port on the PC.
o A Found New Hardware window will appear. Press Locate and install
driver software (recommended).
p Then insert the USB driver CD provided in your router package into the PC,
and press Next.
14
q The system will search disc for the USB driver needed and then complete
the installation.